狠狠色噜噜狠狠狠狠888米奇,99国精品午夜福利视频不卡,亚洲成AV人片在WWW色猫咪,久久精品国产亚洲AV高清色欲

生產線包括：

1.管道傳送架：

12000*1600       5個    每架七組傳送輪

              7500*1600        1個         每架五組傳送輪

              800*1600         6個         每架一組傳送輪

以上采用180#槽鋼焊接，鋼板采用8㎜和6㎜的。輪胎采用充氣輪胎，傳動部分采用五十鈴傳動軸連接，動力部分采用5.5KW*7臺電機，變頻調速，知名廠家減速機。                                                 

2、除銹機：

主箱體采用8㎜厚鋼板，框架部分采用180#槽鋼焊接，內部護板采用10㎜厚高鉻材質護板，拋頭用高效拋頭。 動力部分采用2*37KW電機，提升部分采用3KW電機帶擺線針式減速機垂直皮帶提升機。除塵裝置采用二級除塵，一次為旋風除塵器，二次為布袋式除塵器。配二臺4KW風機。

3、中頻電源加熱：

          配置250KW、500KW二臺中頻加熱設備。250KW用于除銹機前，除去鋼管表面水分，提高除銹效果。500KW用于外環氧粉末噴涂。采用專門設計的控制線路，保證鋼管溫度穩定。兩臺設備各帶一個感應器，兩條3.5米水電纜。

     500kw參數：

     250kw參數：

4、二次除銹裝置：

清除管道外壁毛刺和附銹，動力為4KW，排塵動力為1.5KW。   

5.管道內除銹作業線：

         皮帶供沙機長度15米，架空設置。動力為5.5KW 。噴砂罐采用四路噴砂，槍長12M,

高耐磨槍頭。行走小車動力3KW,軌道架采用120#槽鋼焊接，長度17M,寬度1.3M。

6．管道內噴液體涂料作業線（單、雙組份）:

     單、雙組份涂料采用一條生產線，行走小車為平板車，便于更換料桶。小車動力

為3KW，行走架采用100#槽鋼焊接，長度為15M,寬度為1.2M。（單、雙組份槍頭、料桶、

噴涂機及料管甲方自備）。

7．放管平臺：

三個放管平臺總長72M，由甲方制作。

Ф 79 —Ф 630 derusting and anti-corrosion production line

 the production line comprising:

1. Pipe conveyor:

12000*1600 5 sets  seven sets of transfer wheels

7500*1600 1 set   five sets of transfer wheels

800*1600 6 sets   transfer wheels per set

The above is welded with 180# channel steel, and the steel plates are 8 mm and 6 mm. The tires are made of pneumatic tires, the transmission part is connected by Isuzu drive shaft, the power part is 5.5KW*7 sets of motors, frequency conversion speed regulation, well-known factory reducer.

2 , descaling machine:

The main box is made of 8mm thick steel plate, the frame part is welded with 180# channel steel, the inner guard plate is made of 10 mm thick high-chromium material, and the head is made of high-efficiency throwing head. The power part adopts 2*37KW motor, and the lifting part adopts 3KW motor with cycloidal pin reducer vertical belt hoist. The dust removal device adopts two-stage dust removal, one is a cyclone dust collector, and the second is a bag filter. Equipped with two 4KW fans.

3 , medium frequency power supply heating:

It is equipped with two medium frequency heating equipments of 250KW and 500KW . Before using 250KW for the descaling machine, remove the surface moisture of the steel pipe and improve the descaling effect. 500KW is used for external epoxy powder coating. The specially designed control circuit is used to ensure the temperature of the steel pipe is stable. Both units have one sensor and two 3.5 m water cables.

     500kw parameters:

250kw parameters:

4 , secondary descaling device:

The burr and rust of the outer wall of the pipeline are removed, the power is 4KW , and the dust driving power is 1.5KW .

5. Pipeline derusting line:

The belt sanding machine is 15 meters long and has an overhead setting. The power is 5.5KW . The sandblasting tank adopts four-way sandblasting with a gun length of 12M.

Highly wearable tips. The driving power of the trolley is 3KW, and the rail frame is welded by 120# channel steel, with a length of 17M and a width of 1.3M .

6 . Pipeline spray liquid coating line (single and double components ) :

     The single and double component coatings use one production line, and the walking trolley is a flatbed truck, which is convenient for replacing the material bucket. Car power

For 3KW , the walking frame is welded with 100# channel steel, the length is 15M and the width is 1.2M . (single and double component tips, buckets,

Spraying machine and material pipe are provided by Party A).

7 . Pipeline platform:

The total length of the three release platforms is 72M , which is produced by Party A.